Protect your garden from pesky pigeons and troublesome squirrels by installing these discreet bird spikes to your fence to prevent your garden and fencing becoming spoilt by animal debris.
Made from polycarbonate, the spikes are available in 10-meter bundles so you will have plenty of coverage for your garden fences. Apply them to fences or buildings to preserve the look of your home and protect your recesses and walls from invasion from pigeons, starlings, squirrels, and more.
The discreet design means that the spikes will blend with your garden design and will not be an eyesore on your property.
An active and very effective deterrent, these bird spikes will prevent any form of wildlife coming to roost on your fence, wall, or building.
Designed with a zig-zag pattern, the densely packed spikes angle outwards so each area is covered from all angles.
The spikes are also effective at keeping pets inside your garden, so your house cat can take a stroll in the garden without you having to worry about them making a great escape!
More economical than stainless steel, these polycarbonate spikes are designed to withstand the elements, without the use of rust-resistant coatings or surfaces that wear down with time.
Easy to Install in Only a Few Quick Steps:
1. Inspect the ledges of your house to identify all of the possible spots for birds to perch. Clean the surface of these areas well, taking care to remove droppings, residue and any dirt.
2. Make sure that the surface is dry, and then use screws or fixing silicone, such as AVISIL Bird Spike Adhesive (10mm), to affix the base of the spike strip. Note that this base must be stuck onto the highest surfaces of the ledge – otherwise the pigeons will bypass the Anti-Bird Spikes and perch on any higher areas.
3. Place the first row of spikes along the front of your chosen ledge and press firmly. For wide areas, you may need to install additional rows of spikes. The more tightly you pack the rows of spikes, the better. It’s important not to leave more than 2 inches (5cm) in between each row. If you need to fill a small area, simply break the spikes with your fingers into a shorter strip that fits.
4. Any cavities or holes in the exterior wall behind the Anti-Bird Spikes must be filled with expanding foam or wire mesh. When sealing these holes, check carefully to see if any birds are trapped in the recesses before closing them up permanently!
Features and Specifications:
Wire Diameter of Spike: 1.3mm
Protection Width: 13cm
Spike Length: 11cm
Number of Spikes per Strip: 40 Spikes
Weight: 187g/ metre
Spike Material: 304 Stainless Steel Wire and Polycarbonate Base
Base Dimensions: L: 50 cm x W: 4cm x H: 1cm
1 x Bird Spikes - Polycarbonate zig-zag 10 metre bundle